Pourite is a one component polymer rich cementitious material which is mixed with clean potable water on site and used to create low shrinkage, strong-flowing, self-smoothing plaster.

Pourite can be easily applied over a variety of properly prepared concrete and masonry surfaces or under-floor heating wires to produce a smooth level surface prior to the application of tiles, vinyl, carpet or other floor coverings.

Pourite can be applied in multiple layers with each layer being no more than 10mm thick or it can be economically extended with a graded aggregate to fill greater depths. It is compatible with most commonly used adhesives and can normally receive floor coverings with 24 hours of installation

Application Temperature : 5°C – 30°C
Service Temperature Range : -20°C to 60°C
Coverage : Approximately 1.5kg/m2/mm
Working Time : Approximately 15 minutes @ 20°C
Walkable : Approximately 3 hours @ 20°C
Ready for covering: Approximately 24 hrs per 3mm thickness @ 20°C and @ 65% RH